Dental Care Clinic
About us
Our procedures |
Contact us |
|
|
|
Welcome! |
Feel free compare our prices with another.
We are sure you return back!
Understanding of the quality dental crowns procedure
We are pleased to see you at Dental Care Clinic!
The dental crowns may be molded from metal, ceramic, plastics, or combinations of all three. They are cemented in place and coated to make them more natural looking.
With modern technology, high quality tooth replacements can be made from synthetic plastic resins, ceramic composites, and lightweight metal alloys.
There are several key factors to consider in the design of dental crowns. The most important, appropriate raw materials with which to make the dental crowns must be identified.
The materials of dental crowns must be suitable for use in the oral cavity, which means they must be acceptable for long term contact with oral tissues and fluids.
The crown components must have a good safety profile and must be non-allergenic and non-carcinogenic. Materials for denatl crowns also must be able to withstand the conditions of high moisture and mechanical pressure, which are found in the mouth. They must be resistant to shrinkage and cracking, particularly in the presence of water.
Metal as material for dental crowns is preferred for strength but acrylic resins and porcelain have a more natural appearance. Therefore the selection of crown material is, in part, dependent on the location of the tooth being covered.
Acrylic and porcelain dental crowns are preferred for front teeth, which have higher visibility. Gold and metal amalgams dental crowns are most often used for back teeth where strength and durability are required for chewing but appearance is less critical.
The important factor to consider when designing a dental crowns is the shape of the patient's mouth. Dental restorations must be designed to mimic the bite properties of the original tooth surface so the wearer does not feel discomfort.
There are four main types of materials used in dental crowns construction: the plasters used to create the mold, the materials from which the crown itself is made (e.g., metal, ceramic, plastic), the adhesives used to cement the crown in place, and the coatings used to cover the crown and make it more aesthetically appealing.
Metals are frequently used in dental crowns construction because they have good hardness, strength, stiffness, durability, corrosion resistance, and bio-compatibility. Metals formulated as mixtures of mercury have been historically used. In fact, one source notes that metal amalgam was used as a dental restorative as early as 1528.
Ceramics are well suited for use in dental crowns because they have good tissue compatibility, strength, durability and inertness. They can also be made to mimic the appearance of real teeth fairly closely. However, the tensile strength of ceramic is low enough to make it susceptible to stress cracking, especially in the presence of water.
Ceramic is most often used as a coating for metal-structured dental crowns. The two primary types of ceramics used in dental crowns: made from potassium feldspar and glass-ceramic.
Special dental adhesives, or dental cements, are used to hold the dental crowns in place. Dental adhesives can be classified as either aqueous or nonaqueous. The aqueous type include zinc phosphates, polycarboxylate cements, glassionomer cements, and calcium phosphate cements. The nonaqueous type include zinc oxide-eugenol, calcium chelates, and acrylic resins such as polymethyl methyacrylate.
The prosethedontist may design the crown's surface with mechanical undercuts to give the coating a better grip. Resin coatings have relatively low mechanical strength and color stability and poor abrasion and stain resistance as compared to porcelain.
Before beginning dental crowns placement process, the dentist may need to prepare the area where the crown is to be installed. This may require the removal of 2-3 millimeters of tooth structure from the four sides and the biting edge. Then, an impression of the tooth is taken to record its shape. This step uses impression plaster which is the softest and fastest setting type of dental plaster. The impression plaster is mixed with a small amount of water until it is fluid. This slurry is placed in a tray that is fitted over the teeth. The tray is held still in place until the plaster hardens. When the tray is removed from the mouth, it retains a three dimensional impression of the tooth that is to be covered. This impression is a negative, or reverse, image of the tooth.
The crown may require a finishing coat to seal it and improve its natural appearance. Such coatings are typically acrylic polymers. The polymer can be painted on as a thin film, which hardens to a durable finish. Some polymers require a dose of ultraviolet light to properly cure.
Good quality control is critical to ensure the dental crowns fits and looks natural in the patient's mouth. Every crown is unique because every person's mouth is different and every crown is custom molded to fit.
To ensure appropriate fit and feel, fine details can be added to the crown by hand after the molding process is completed. Even with minor adjustments, quality problems and failures in crowns are likely to occur. Key quality control issues include failures due to biological factors (such as caries, recurrent decay, sensitivity problems, and periodontal diseases), mechanical reasons (including fracture of the crown surface, and poor cementation), aesthetic problems (discoloration of the surface), and damage due to traumatic accidents. In such situations it may become necessary to reposition or remove a crown to allow for either replacement or other dental operations.
This futuristic crown material is made by an advanced Computer Aided Design (CAD) process, known as Procera process, which was introduced in the mid-1990s in Switzerland. This process results in dental crowns with improved strength and optimal fit. Unlike other crown materials, dental crowns made by the Procera process can be used anywhere in the mouth due to the strength of its core material and its more natural appearance.
Another advance in dental crowns technology involves pre-made and pre-sized stainless steel crowns, which are designed as generic tooth replacements. Usage of this new type of crown is very simple: first the tooth surface is prepared then the selected crown is cemented in place with a standard stainless steel crown adhesive. The crown can be crimped or cut to fit and the epoxy finish will not chip or peel. While this new technology offers increased simplicity, it does not give the same appearance as a custom made crown.
Dental crowns cost
The dental crowns price displayed are an approximate guide only. Please remember that each person is different and therefore each treatment is slightly differs.
Our prices for the dental crowns at Dental Care Clinic:
Dental crowns consultation | 41 EUR |
Ortopantomogram for dental crowns | 58 EUR |
One tooth removing | 124 EUR |
One root canal clearing | 22 EUR |
One canal filling | 20 EUR |
Local anaesthesia, 1 application | 13 EUR |
One crown, full ceramic | 343 EUR |
One temporary crown | 54 EUR |
One artificial tooth | 208 EUR |
Feel free to contact us should you have any questions that were not answered within this page about dental crowns.
Use form on our contact us page you may book exactly the day and the time of your consultation with doctor our Dental Care Clinic about dental crowns or any other procedure.
If you consider to visit in Prague, you may stay in hotel part of our Dental Care Clinic with room like hotel 4* all time your Prague`s visit.